Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of CP PRYME® ABS A100-36 - ABS - Chase Plastics

Material Data Center offers the following functions for CP PRYME® ABS A100-36:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other CP Pryme datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades
Any use of this information falls under the rules of our disclaimer.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ASTM Data
Índice de fluidez, MFI 21 g/10min ASTM D 1238
Temperatura 220 °C -
Carga 10 kg -
Contracción posterior al moldeo, paralelo 0.0055 mm/mm ASTM D 955
Propiedades mecánicasValorUnidadesMétodo de ensayo
ASTM Data
Módulo de tracción 2080 MPa ASTM D 638
Esfuerzo de fluencia a tracción 45.1 MPa ASTM D 638
Alargamiento a la rotura 40 % ASTM D 638
Módulo de flexión 2450 MPa ASTM D 790
Resistencia a la flexión 72.6 MPa ASTM D 790
Dureza Rockwell R108 - ASTM D 785
Resistencia al impacto Izod con entalla, 1/8 in 390 J/m ASTM D 256
Resistencia al impacto Izod con entalla, 1/4 in 130 J/m ASTM D 256
Resistencia al impacto Izod con entalla, baja temperatura 340 J/m ASTM D 256
Temperatura -30 °C -
Propiedades térmicasValorUnidadesMétodo de ensayo
ASTM Data
Estabilidad al calor @ 66 psi 91 °C ASTM D 648
Estabilidad al calor @ 264 psi 87 °C ASTM D 648
Temperatura Vicat 93 °C ASTM D 1525
Otras propiedadesValorUnidadesMétodo de ensayo
Densidad 1040 kg/m³ ASTM D 792
Características
Forma de suministro
Sémola
Disponibilidad regional
Norteamérica
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.